5 m³ LPG TRANSPORT TANK TECHNICAL DETAILS: |
BRAND |
: |
SERİN |
TANK TYPE |
: |
Horizontal Cylindrical |
PROJECT CODE |
: |
AD- Merkblatter / EN 13445 |
DESIGN TEMPERATURE |
: |
Min -20°C / max +70°C |
DESIGN PRESSURE |
: |
17,5 bar |
TEST PRESSURE |
: |
26,5 bar |
MATERIAL |
: |
P355 GH or P355NH |
HEAD TYPE |
: |
Elipsoidal |
EXTERNAL TANK DIAMETER |
: |
55 m3 2.400 mm |
BODY TANK THICKNESS |
: |
55 m3 10 mm |
HEAD TANK THICKNESS |
: |
55 m3 12 mm |
TOTAL LENGTH OF TANK |
: |
55 m3 11.200 mm |
CORROSION |
: |
1 mm |
TANK VOLUME |
: |
55 m3 |
EQUIPMENT TANKS OVER |
: |
Hydraulic Operator 1 unit, 2 “Ball Valves 2 units BATU, 2” Hydraulic valves 1 units ATILIM, 3” Hydraulic valves 1 unit ATILIM, 2 “Safety Valves 2 units ATILIM, Rotogauge (Rotary Level Indicator) 1 unit, ATILIM Glycerine pressure gauge (0-25 bar), Ø 63 1 unit, PAKKENS Thermometer (-30 / 60 ° C) Ø63 1 unit, PAKKENS Acme Filler Cap 2 units ATILIM Manhole 1 unit 16” Filter 1 unit |
BLASTING AND PAINTING |
: |
Before painting, the Tank will be sand blasted with SA 2.5 quality undercoat & polyurethane based white topcoat applied providing a total thickness of min. 150 microns. COLOUR: WHITE |
CONTROL (INSPECTION AND TESTS) |
: |
All tests & inspections mentioned below wiil be carried out under the control of third party & certified by the same authority. Checking & approval of design & calculations, Material inspection & stamp transferring seperately, Visual & dimensional inspection plate orientation, Head control, Radiographic control, Penetrate dye test, Hydrostatic test, The reports of the A/M tests & inspections will be presented to the customer together with the inspection certificate of teh tank whicih will be given by the third party after the completion of the tank & the inspections. |
CERTIFICATION |
: |
ISO 9001-2008 VE EN 3834-2 |
WELDING METHOD |
: |
All welders are certified according to EN 287-1:2004 standard. Full Penetration will be provided in weld seams. Welding will be carried out as submerged arc welding by welders. The Grooves will comply with EN ISO 9692-2. & The Filling Material with EN ISO 14171 & The Flux with EN 760. |
HEAT TREATMENT |
: |
Only Heads will be applied relieving stress. |
BAFFLES |
: |
Tank will have 3 units of Anti-slosh baffles. |
|
|
|
SEMI TRAILER TECHNICAL DETAILS: |
4 AXLES SEMI-TRAILER |
|
|
CHASSIS |
: |
Half chassis made of 6252 steel quality. HEAVY DUTY Type |
AXLE |
: |
Brand: SERİN AXLE 12 TON. Capacity: Capacity: 2X16 tons/per axle Type: : Mechanical Suspension suspension Axle Drum Brake |
SUSPENSION SYSTEM |
: |
Mechanical Suspension |
BRAKE SYSTEM |
: |
WABCO ABS (GERMAN) |
LIFTING JACK (LANDING GEARS) |
: |
JOST brand with double speed and the capacity to carry 25 tons each. |
TYRES |
: |
Size 315X80X22,5 BRIDGESTONE 8+1 units. |
BALL VALVES BOXES |
: |
Valves to be in right side |
RIMS |
: |
Size is R22,5 9 units JANTSA Brand |
FENDERS |
: |
Steel body with Aluminum covering |
KING PIN |
: |
2 ” flange and a high level of beating stress and rupture Resistant steel and bolted to the system has been dismantled and can be changed easily. OMS King Pin plate thickness will be 12 mm and will be reinforced with min. 3+2 steel 160 NPU. |
ELECTRICAL SYSTEM |
: |
There are 24 V electrical systems with European norms. In Addition, tank-top and trailer top and the electric lamp and warning will be posters. (ADR) 2 stop lights on the rear Bumper, 5 lights on the each side of the tank. |
REFLECTORS |
: |
3M Brand yellow color along both sides of the Tank and 3M Brand red color on the rear bumper and on the rear dished Heads. |
ACCESSORIES |
: |
1 unit Steel Bumper, 1 unit water tank (Made of Plastic with the capacity of 30 lt), 1 unit spare tire carrier basket, 2 units wheel chock and the connection, 2 units Fire Extinguisher Cabinet (ADR), 2 units Food & Tool Box made of steel. |
Reviews
There are no reviews yet.